Korg EMX-1 Bedienungsanleitung PDF herunterladen (Seite 2)

3 4

2 1

DRUM PART

Preparations

Connect the included AC/AC power supply to the EMX-1’s ~AC

9V connector, and plug the AC/AC power supply to an AC outlet.

You must first connect the AC/AC power supply to the EMX-1, and

then plug it into the AC outlet.

Connect audio cables from the EMX-1’s line out jacks (L/MONO,

R) to your mixer or powered monitor system (amplified speak-

ers). If you are using a monaural connection, use the L/MONO

jack.

If you are using headphones, plug them into the headphone jack.

Sound will still be output from the line out jacks even if head-

phones are plugged in.

Turn on the power switch.

Slightly turn up the EMX-1’s master volume, and touch the drum

part keys to produce sound so that you can check that the connec-

tions are correct.

Adjust the EMX-1’s master volume, and the gain and faders of

your mixer or powered monitor system to an appropriate listen-

ing level.

You must turn off the power before

making connections. Careless op-

eration can damage your speaker

system or other equipment, and

may cause malfunctions.

1 2 3 4 5 6 7 8

Keine Kommentare

Korg EMX-1 Bedienungsanleitung Seite 2