Korg M50 Bedienungsanleitung PDF herunterladen (Seite 18)

If you’re routing the M50’s audio signal to an audio track, arm the REC button on so that

you can hear/monitor the audio signal.

If you are routing the M50’s audio signal to an AUX input track, this setting is not

necessary.

Audio Track

Other host applications

Start up your host application.

Start up “M50 Plug-In Editor” as a plug-in instrument.

Create a MIDI track. Choose “M50 Plug-In Editor” as the output of that MIDI track.

To route the M50’s audio signal to your host application, create an audio track. On the

input section of that audio track, select the input that you connected the M50’s audio

signal to.

Enable the monitor function on the audio track that will be receiving the audio signal from

the M50.

Note:

The instructions given here for “Other host applications” may not necessary be appropriate

for setting-up all host applications. Please refer to the instructions for a host application that has a

similar structure to the host application you’re using, and always refer to the owner’s manual for

the specific host application that you are using.

About MIDI timing

If you experience irregularities in MIDI timing, please adjust the settings so that MIDI messages

are sent directly to the M50 rather than being routed through the M50 Plug-In Editor. In this case,

select the M50’s SOUND port as the MIDI OUT destination of the MIDI track in your host

application, so that the MIDI messages will be sent directly to the M50.

Note:

For details on how to create a MIDI track and specify the MIDI OUT destination for that

MIDI track, refer to the host application’s owner’s manual.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 32 33

Keine Kommentare

Korg M50 Bedienungsanleitung Seite 18