Korg Triton Studio Bedienungsanleitung PDF herunterladen (Seite 62)

Sequencer

P1 P2 P3 P4 P5 P6 P7 P8 P9

Reso (Realtime Quantize Resolution) [Hi, 3 …  ]

This corrects the timing of data as it is recorded in realtime.

(It does not affect previously-recorded data.)

Hi (High Resolution): Timing will not be corrected. Data

will be recorded at the maximum resolution (/192).

3 –  : Data will be corrected to the nearest interval of the

speciﬁed timing as it is recorded. For example if you select

3 , data will be corrected to the nearest 32nd note triplet

interval. If you select , data will be corrected to the nearest

quarter note interval.

Since all that musical data that is recorded will be corrected

to the speciﬁed timing resolution, coarse settings of this

parameter will cause continuous controllers such as pitch

bend to be recorded in “stairstep” fashion.

In such cases, use a setting of Hi to record, and then use

“Quantize” (5–1N) to correct only the desired type of data

(notes etc.). It is best to avoid recording at a stiff resolution

to begin with.

RPPR On/Off [Off, On]

This turns the RPPR (Realtime Pattern Play/Recording)

function on/off. RPPR lets you assign a pattern to each note

of the keyboard, so that the pattern will playback (or be

recorded) when you press the appropriate key.

On (checked): The RPPR function will be on. If a pattern

has been assigned to each key in the P6: Pattern/RPPR,

RPPR Setup page, pressing that key will perform the

assigned pattern (☞P6–3: RPPR Setup).

0–1(2)b: Selected Track Information

Displays information for the track (1–16) that is currently

being edited or selected by “Track Select.”

T (Track) (01...08 (09...16))

Indicates the track number and the program bank/number/

name speciﬁed for that track.

Ch (01...16)

Indicates the MIDI channel number speciﬁed for the track.

RPPR (NoAssign, C#2...C8)

This shows the key number(s) that will start the RPPR pat-

tern assigned to the track. (If there are numerous keys, not

all will be shown. To view all of the assignments, use the P6:

Pattern/RPPR, Pattern Edit page.)

0–1(2)c: Track Number, Category, Bank/Program,

PLAY/MUTE/REC, SOLO ON/OFF

Track Number (1...8 (9...16))

Indicates the track number.

Use the parameters located below “Track Number” to make

settings for that track number.

Category [00...15]

The program to be used by the track can be selected by cate-

gory. All programs are classiﬁed into one of sixteen catego-

ries. You can select the desired category, and then choose

programs from that category.

When you press the popup button, the Category/Track Pro-

gram Select menu will appear.(“Category/Program Select

menu” ☞Program P0: 0–1a)

Program Select (Bank/Program)

[INT-A...INT-F, G, g(1)...g(9), g(d), EXB-A...EXB-G]

Selects the program that will be used by the track.

The lower line displays part of the program name.

If “Program Select” is selected, you can use the BANK [INT-

A]–[EXB-G] keys and VALUE controller to make the setting.

If you press the popup button, the Bank/Track Program

Select menu will appear, allowing you to select a program.

(“Bank/Program Select menu” ☞Program P0: 0–1a)

If you select “Program Select,” the BANK key LED will

light to indicate the bank of the program selected for

the track.

Bank INT-F can be selected if the EXB-MOSS option is

installed. If this is installed, 128 special EXB-MOSS pro-

grams can be used.

The program you select here will be used when the song is

played or recorded from the beginning. If the program is

changed while recording, the program change will be

recorded as musical data, and the program will change dur-

ing playback. You can also change the program manually

during playback. However if musical data (program change

data) is already recorded, the program will change at that

point.

If the “Status” (2–1a/2a) is either INT or BTH, pro-

grams can be selected by receiving MIDI program

change messages. Also, when the song is changed or

when the song returns to the beginning, tracks whose

“Status” is EXT, EX2 or BTH will transmit the bank and

program numbers via MIDI. Tracks whose “Status” is

EX2 will show Bank as “–” and will transmit the bank

number that was selected in the “Bank Select” (2–1a/

2a) setting.

PLAY/MUTE/REC [PLAY, MUTE, REC]

Here you can mute each track, and select the recording

track(s) when performing multi-track recording. During

playback, or for single-track recording (normal recording), it

is possible only to select PLAY or MUTE for tracks (play-

back tracks) other than the recording track. For multi-track

recording, tracks can be set to PLAY, MUTE, or REC. The

setting will alternate each time you press the PLAY/MUTE/

REC button.

PLAY: The track will play.

MUTE: The track will be muted (silent).

REC: This will be displayed during single-track recording

(normal recording). It cannot be selected.

When you use multi-track recording (the Preferences page

“Multi REC” is on), select REC for the tracks that you wish

to record.

SOLO ON/OFF [SOLO ON, SOLO OFF]

This turns the Solo function on/off.

Only the track that is set to SOLO ON will sound. Other

tracks will be muted.

The setting will alternate on/off each time you press the

SOLO ON/OFF button.

If tracks whose “Status” (2–1a/2a) is BTH, EXT, or EX2

are muted by Mute or by the Solo function, note on/off

messages will not be transmitted on the MIDI channel

selected for those tracks.



 

      

With a setting of 

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 321 322

Kommentare zu diesen Handbüchern

Keine Kommentare

Korg Triton Studio Bedienungsanleitung Seite 62

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Die Eingabegeräte Korg Triton Studio